WiFi Module for Online Save Kit
Includes tax / shipping cost not included
Ready to ship!
This items ships quickly
- Order number: WiFi
Privacy Information: The sharing buttons are implemented as a link. No data will be transmitted to third parties without interaction.
This module is designed to connect to your internet wirelessly, it will make your dreams come true!
- Able to connect to your Wi-Fi network
- Plugs in to your online capable kit by removing the Atmega 40pin eprom and removing the ribbon cable/CAT5 module
- Easy setup - follow the install guide - https://highscoresave.com/installing-an-online-wifi-module-upgrade
* There is one Wi-Fi modual per quantity of 1
- PLEASE NOTE - This will be for all online capable save kits. You can choose current lineup from dropdown selection.
- Check out the installation PDF before purchase.
- DO NOT PLUG THIS MODULE UPSIDE DOWN. WE ARE NOT RESPONSIBLE FOR DAMAGE TO YOUR PCB
My game is not on the drop down list. What now?
You cannot upgrade to Wi-Fi then. It takes time to reprogram each kit. I will be working on this as time permits
The "must have" upgrade!
The WiFi kit was very easy to install and set up. No issues at all using the online instructions. This upgrade allowed me to move my router and all the CAT 5 cables out of my arcade. If you have the online kits, this is a perfect upgrade.
Help! I'm getting an error on the screen!
On your monitor messages -
DHCP REQUEST
Initialization status, this is good.
DHCP OK
You are successfully connected to your WLAN network successfully connected to www.arcadehighscores.com
(This message is fast, so, sometimes the "DHCP OK" can not be seen)
DHCP ERROR A / DHCP ERROR F (alternately)
WLAN WiFi module couldn't connect to the saved access point and went to "setup-mode" [module goes into access point mode that customer can setup his network]
- OR -
WLAN WiFi module isn't set up to the access point yet and module is in access point mode that customer can setup his network
[when WLAN WiFi module is in access point mode, customer has 10 minutes to set up his network. In this time, the green and the red led on the savekit pcb are flashing alternatively]
DNS ERROR A / DNS ERROR D (Alternating)
WLAN is connected, module tries to connect to arcadehighscores.com and gets an error message in response.
This can be either due wrong PK/SK or customer isn't set up in database yet or customer is not allowed to send scores [when error, the red led on the savekit pcb is flashing very fast for about 1 second]
