No results were found for the filter!
Darksoft CPS2 Multi Kit - Champion Edition 2020
This is a PREORDER ETA shipping is early November 2020. Get your NEW version secured today, order now to save your product! First come, first shipped! We are the only USA Distributor for your Darksoft Multi Kit needs! It is our pleasure...
From $499.99 *
PAL G for Darksoft CPS2 Multi Kit
Need a PAL G for your Darksoft CPS2 Multi Kit? Specifications GAL16v8D Features Programmed for the Darksoft CPS2 Multi Kit Packing Included 1x Programmed GAL16v8D Official support on - Now stop reading and go get yours!!!
PCB feet for Darksoft CPS2
Need PCB feet for your Darksoft CPS2? This is a 3D printed set of feet for your Darksoft CPS2 Multi. These feet are designed to be assembled with no additional hardware, so they just snap in your case without anything else needed. Easily...
Darksoft CPS2 Torx
Need to open your case for your Darksoft CPS2 Multi install? The Torx bit is suitable for opening your CPS2 case to install your new Darksoft CPS2 Multi kit! Made from S2 Material Finish and covered with magnetic shielding
LCD Protector for Darksoft CPS2 or Taito F3 Multi
Need a LCD case for your Darksoft CPS2 or Taito Multi-F3? This is a 3D printed case for the LCD Selector used on the Darksoft CPS2 and Taito F3 Multi's. This case is designed to be assembled with no additional hardware, so it just snaps...
Long Flat Cable for Darksoft CPS2 or Taito...
Need an extention for your LCD screen on the Darksoft CPS2 or Darksoft Taito Multi-F3? This is approximately 3 foot long (100cm) so you can remote mount this towards your coin door. Flat cable with the proper 7x2 female connectors...
8GB Micro SD for Darksoft CPS2 or Taito Multi-F3
Need a Micro SD for your Darksoft CPS2 or Taito Multi-F3? This is an 8GB blank Sandisk Class 4 for all your programming needs! Official support on - Now stop reading and go get yours!!!