Installation Guide | Donkey Kong | Pauline Donkey Kong Free Play and High Score Save Kit

Donkey Kong | Pauline Donkey Kong Installation Guide

https://highscoresave.com/

Steps for a successful install of your online or offline high score save kit -

·       Ensure your gameboard is working 100% before installing kit

·       Ensure power to game is off before removing your gameboard from  cabinet

·       Label any connectors that you will be disconnecting. This will make reinstalling easier once kit is on gameboard

·       Note which way your connectors/cables are on. (We suggest taking pictures to help you remember!)

·       Work in a well-lit area on your workbench

Please note – you will need a z80 to install on this kit. There is an option to purchase in the drop downs of the product page when you order. Or you can use an existing one have. 

Overview –

This Donkey Kong and Pauline Edition Free Play and High Score Save Kit requires 5 additional eproms to run Pauline Donkey Kong properly. You can either purchase in the drop down selections when you are on the product page, or download them yourself at the bottom of the product page and burn them yourself to afive 2732 eproms.

Picture of a 4 PCB stack and where to install –

Picture of a 2 PCB stack and where to install –

Start with locating your z80 socket.

This is what your pcb should look like. This kit will only work on a DK PCB.

1.    Locate your z80 –

2.    Install the z80 onto the daughter card then attach it to PCB like this.     

[Ensure PIN 1 of the z80 is installed with the proper orientation]-

3.    Ensure that nothing is hitting the underside of the new daughter card from your original PCB. Sometimes test points on your PCB need to be bent away.

That's it!

Double check your work

Install back in cabinet using pictures you took and any marked

connectors

Power up the game and enjoy!

If the game does not start, turn power off immediately, double check your work.

Helpful link - https://highscoresave.com/highscoresaves-kit-tips-and-tricks

How do I get to the menu settings?

With the power off on your game. Press and hold P1 while you turn the game on. Release P1 button when the screen tells you to. You are now in the main menu settings. This is a feature built into your kits, so the menu settings are not accessible to your guests or family.

Now, having said that, you need to enable this feature in the menu settings, or disable if you want your kit to give you approximately 5 seconds every time you turn on your game.