Products from Vector Labs
No results were found for the filter!
Wowza!
Sold Out
Tired of pulling your pcbs out of the cage to test? You have to pull one out, trying not to move the others (which NEVER works), so, you remove the one in front of it, now the one behind it....Well, no more! You can install this extender...
$129.99 *
Wowza!
Tired of pulling your pcbs out of the cage to test? You have to pull one out, trying not to move the others (which NEVER works), so, you remove the one in front of it, now the one behind it....Well, no more! You can install this extender...
$99.99 *
Wowza!
Tired of pulling your pcbs out of the cage to test? You have to pull one out, trying not to move the others (which NEVER works), so, you remove the one in front of it, now the one behind it....Well, no more! You can install this extender...
$129.99 *
Wowza!
THE SW/ESB 12K VRAM UPGRADE IS A MODULAR REPLACEMENT FOR THE SIX 2K X 8 SRAMS ON THE STAR WARS VECTOR BOARD.
$49.00 *
Sold Out
THE LETA REPLACEMENT CHIP REPLACES YOUR OLD OR DEFECTIVE LETA CHIP IN GAMES LIKE MAJOR HAVOC AND UTILIZES NEW SURFACE MOUNT DEVICES TO PROVIDE YEARS OF TROUBLE FREE OPERATION.
$49.99 *
Wowza!
Here it is! Your answer to flaky cardrack motherboards for Gorf, Robby Roto, Space Zap and Wizard of Wor! This is a new reproduction that is clean as a whistle and doesn't have 40 years of dirt and grime sitting inside the edge...
$165.00 *
Wowza!
REPLACEMENT FOR THE TROUBLESOME LV SECTION ON THE 6100 DEFLECTION BOARD. Soldering and de-soldering will be necessary to install this upgrade.
$39.99 *
Wowza!
THE SEGA/GREMLIN KIT INSTALLS ON ANY STAR TREK ARCADE BOARD SET AND ALLOWS THE USER TO PLAY EITHER STAR TREK, SPACE FURY, ELIMINATOR, ZEKTOR OR TAC/SCAN BY HOLDING THE PLAYER 2 BUTTON THEN PRESSING THE PLAYER 1 BUTTON TO CYCLE THROUGH...
From $199.99 *
Wowza!
Sold Out
THE SEGA / GREMLIN MULTI SOUND BOARD IS A MODULAR REPLACEMENT FOR THE G80 MEATBALL/ELIMINATOR AND THE BATTLESTAR/SPACE FURY SOUND BOARDS.
$399.99 *
Wowza!
THIS XY VIDEO MOD FOR THE SEGA/GREMLIN 5IN1 KIT PLUGS DIRECTLY ON THE G80 XY TIMING BOARD AND CORRECTS TAC/SCAN TO PLAY ON A HORIZONTAL MONITOR. **MUCH SIMPLER TO INSTALL THAN THE BXYYR. **X-OFFSET & Y-OFFSET ADJUSTMENT POTS HAVE BEEN...
$60.00 *
Wowza!
Replacement dual monitor ribbon cable for Vector Lab Switchers and Adapters.
$11.00 *
Wowza!
Replacement single monitor ribbon cable for Vector Lab Switchers and Adapters.
$10.00 *
Viewed