Vector Labs Midway Buss Test Display

The Midway/Bally Buss Display is designed Raster arcade board sets which utilize the test card edge connector on the side of the PCB. The board displays the state of both Address & Data Buss pins with three selectable update rates via a push button. Test points are also provided for VCC, GND,  and CLOCK. Four status led's are provided for BUSRQ, BUSAK HALT & RESET.

Connects to the Bally/Midway card edge test connector on most Midway arcade boards like Pavman and Gamaga. Displays the Address & Data Buss while using one the Vector Labs Microprocessor Debuggers. Variable display rate and test points for GNS, VCC & clock. Status led's for RESET, BUS REQUEST, BUS ACKNOWLEDGE & HALT.

ll Vector Labs products have a limited lifetime warranty from defects in workmanship. We cannot warranty our products from improper installiation, power surges, lightning strikes, etc.  All of our products have install guides in PDF format that you can download in advance of ordering so that you can determinine if you have the technical skills to perform the install.