
The Atari Buss Display is designed for Atari Raster & Vector board sets which utilize the Catbox card edge connector on the side of the PCB. The board displays the state of both Address & Data Buss pins with three selectable update rates via a push button. Test points are also provided for VCC, GND, PHASE0, PHASE2 and R/W.
Connects to the Atari card edge test connector on most Atari arcade boards and displays the Address & Data Buss while using one the Vector Labs Microprocessor Debuggers. Variable display rate and test points for R/W , Phase0 clock & Phase2 clock.
ll Vector Labs products have a limited lifetime warranty from defects in workmanship. We cannot warranty our products from improper installiation, power surges, lightning strikes, etc. All of our products have install guides in PDF format that you can download in advance of ordering so that you can determinine if you have the technical skills to perform the install.